Sustaining your car’s transmission fluid is essential for optimum efficiency and longevity. For those who personal a 2008 or 2009 Ford Edge, it is beneficial to periodically exchange the transmission fluid to maintain your automobile operating easily. By following a couple of easy steps, you’ll be able to accomplish this activity with ease and make sure the continued well being of your car’s very important parts.
Earlier than beginning the transmission fluid change course of, collect the mandatory instruments and supplies. You will want a brand new transmission filter, transmission fluid, a drain pan, a funnel, a torque wrench, and a pair of gloves. Moreover, it is advisable to put on security glasses to guard your eyes from splashes. After getting the mandatory gear, find the transmission drain plug, which is normally on the backside of the transmission pan, and the transmission dipstick, which is usually discovered close to the engine. To empty the previous fluid, fastidiously take away the drain plug and permit it to empty fully into the drain pan.
After draining the previous fluid, exchange the drain plug and tighten it to the required torque. Subsequent, find the transmission filter and take away the bolts holding it in place. Set up the brand new transmission filter and tighten the bolts. Now, add the brand new transmission fluid via the dipstick tube utilizing a funnel. Examine the fluid stage on the dipstick and add extra fluid as wanted till it reaches the right mark. Lastly, begin the engine and let it idle for a couple of minutes, shifting via the gears to flow into the brand new fluid. Recheck the fluid stage and regulate as essential.
Collect Supplies and Put together Automobile
Supplies Required:
Earlier than initiating the transmission fluid change, it’s essential to assemble the mandatory supplies. Guarantee you’ve the next gadgets:
| Merchandise | Specification |
|---|---|
| Transmission Fluid | Ford Mercon LV (approx. 5 quarts) |
| Transmission Filter | Ford OEM or equal |
| Transmission Pan Gasket | Ford OEM or equal |
| Drain Pan | Massive sufficient to carry at the very least 5 quarts of fluid |
| Funnel | For pouring new transmission fluid |
| Torque Wrench | For tightening drain plug and filter bolts |
| 10mm Socket or Wrench | For eradicating drain plug and filter bolts |
| Security Gloves | To guard palms from scorching fluid |
| Rags or Towels | For cleansing up spills |
Automobile Preparation:
After getting gathered the required supplies, put together the car for the fluid change. Observe these steps:
- Park the car on a stage floor and interact the parking brake.
- Open the hood and find the transmission fluid dipstick.
- Take away the dipstick and wipe it clear with a rag.
- Reinsert the dipstick and pull it out once more to test the fluid stage.
- If the fluid is at or beneath the “MIN” mark, it must be modified.
Find the Transmission Fluid Pan
As soon as you’ve got gathered the mandatory supplies, it is time to find the transmission fluid pan. It is usually discovered on the backside of the transmission, and it serves as a reservoir for the fluid. This is tips on how to discover it:
- Park your automobile on a flat floor. If potential, elevate the entrance finish of your automobile utilizing ramps or jack stands to offer higher entry to the transmission fluid pan.
- Determine the transmission. It is normally situated on the entrance of the engine and is related to the driveshaft. The transmission casing is usually product of steel and is bolted to the engine.
- Search for the transmission fluid pan. It is a steel pan hooked up to the underside of the transmission. It normally has a sq. or rectangular form and is held in place by bolts or screws.
This is a tip: The transmission fluid pan is usually stamped with the transmission mannequin or kind. This info may be helpful if you want to buy a alternative pan or filter.
Find the Drain Plug
Underneath the car, find the transmission drain plug. It’s usually a black or silver bolt situated on the underside of the transmission pan.
Collect Instruments
|
|
|
|
Drain the Fluid
Place the drain pan below the drain plug. Utilizing a 17mm socket wrench, fastidiously loosen the drain plug and permit the previous transmission fluid to empty into the pan. Be cautious because the fluid could also be scorching.
As soon as the fluid has stopped draining, tighten the drain plug securely.
In case you are altering the transmission filter, observe the producer’s directions to take away the previous filter and set up the brand new one.
Examine the transmission fluid stage and add new fluid as wanted till it reaches the beneficial stage on the dipstick.
Drain the Previous Fluid
1. Security First
Park your Ford Edge on a stage floor and interact the parking brake. Let the engine cool all the way down to keep away from any burns.
2. Find the Drain Plug
Crawl below the entrance of your car and find the transmission pan. It is normally a big steel pan situated on the backside of the transmission. Determine the drain plug, which is usually a 17mm or 19mm bolt.
3. Put together to Drain the Fluid
Place a big drain pan beneath the transmission pan to catch the previous fluid. Make sure the drain pan is positioned to keep away from any spills. Loosen the drain plug barely, permitting the fluid to begin draining.
4. Full Fluid Drainage
Enable roughly 10-Quarter-hour for almost all of the previous transmission fluid to empty out. Because the circulation slows, tighten the drain plug again into place. Clear the drain plug and the encircling space completely to forestall any leaks.
Be aware: The quantity of fluid drained could fluctuate relying on the car’s mannequin and transmission kind. Confer with your proprietor’s guide for particular fluid capacities.
Clear the Drain Plug and Pan
After draining the transmission fluid, it is time to clear the drain plug and pan. Begin by wiping away any extra fluid with a clear rag. Then, examine the drain plug for any indicators of harm or put on. If the plug is broken, it can should be changed. Subsequent, use a brush to take away any particles from the pan and magnet. The magnet is designed to draw steel filings, so it is necessary to scrub it often to forestall them from circulating within the transmission fluid and inflicting harm.
As soon as the pan and drain plug are clear, it is time to reinstall them. First, apply a skinny layer of gasket maker to the drain plug and reinstall it within the pan. Tighten the plug to the producer’s specs (usually round 25-30 foot-pounds). Subsequent, reinstall the pan, ensuring to align it correctly and tighten the bolts to the producer’s specs (usually round 10-12 foot-pounds).
Examine the Transmission Filter
When you have the transmission pan off, it is a good time to examine the transmission filter. If the filter is soiled or clogged, it might limit the circulation of transmission fluid and trigger harm to the transmission. To take away the filter, merely unclip it from the valve physique. Examine the filter for any indicators of harm or put on. If the filter is broken, it can should be changed. To reinstall the filter, merely clip it again into place on the valve physique.
Set up the New Filter (if relevant)
In case your transmission filter is situated contained in the transmission pan, you’ll be able to change it whenever you change the fluid. It is a easy course of:
- Find the filter within the transmission pan.
- Take away the previous filter and discard it.
- Set up the brand new filter into the transmission pan.
- Bolt the transmission pan again onto the transmission.
In case your transmission filter is situated exterior the transmission pan, you will want to observe particular directions to your car to entry and alter it. Seek the advice of your car’s guide or an internet discussion board for detailed steps.
Listed below are some extra suggestions for putting in a brand new transmission filter:
- Be sure the brand new filter is the right kind and measurement to your car.
- Apply a skinny layer of transmission fluid to the gasket of the brand new filter.
- Tighten the transmission pan bolts to the required torque.
- Begin the engine and test for leaks.
| Instruments You will Want |
|---|
| Wrench or socket set |
| New transmission fluid |
| New transmission filter (if relevant) |
| Clear rags |
Change the Drain Plug
7. Rigorously hand-tighten the drain plug again into the transmission pan till it’s cosy. Use a torque wrench to additional tighten the drain plug to the required torque, usually between 25 and 30 foot-pounds (34 and 40 newton-meters). This ensures that the drain plug is securely fixed and won’t leak.
| Transmission Kind | Drain Plug Torque |
|---|---|
| 4-Pace Automated (4F50N) | 25 ft-lbs (34 Nm) |
| 4-Pace Automated (4F27E) | 30 ft-lbs (40 Nm) |
| 6-Pace Automated (6F50) | 30 ft-lbs (40 Nm) |
Overtightening the drain plug can harm the threads or the transmission pan. If you do not have a torque wrench, use a brand new drain plug and washer to make sure a correct seal.
Add the New Fluid
The ultimate step is so as to add the brand new fluid to the transmission. Use a funnel to pour the fluid into the dipstick tube. Add the fluid slowly, checking the dipstick often to make sure you do not overfill the transmission.
As soon as you’ve got added the correct quantity of fluid, exchange the dipstick and tighten it securely. Begin the engine and let it run for a couple of minutes to flow into the brand new fluid. Then, shift via all of the gears to make sure the fluid is flowing correctly.
Further Suggestions for Including the New Fluid
Listed below are some extra suggestions for including the brand new fluid:
- Use the right kind of fluid to your transmission. Confer with your proprietor’s guide for the beneficial fluid kind.
- Be sure the funnel is clear earlier than utilizing it.
- Add the fluid slowly and test the dipstick often to make sure you do not overfill the transmission.
- As soon as you’ve got added the correct quantity of fluid, exchange the dipstick and tighten it securely.
- Begin the engine and let it run for a couple of minutes to flow into the brand new fluid.
- Shift via all of the gears to make sure the fluid is flowing correctly.
| Instruments and Supplies | Amount |
|---|---|
| New transmission fluid | 4-6 quarts |
| Funnel | 1 |
Examine the Fluid Stage
Checking the transmission fluid stage is an important step in sustaining your 2008-2009 Ford Edge. This is an in depth information that can assist you do it appropriately:
- Park the car on a stage floor. This can guarantee an correct fluid stage studying.
- Begin the engine and let it run for a couple of minutes. This can flow into the fluid and heat it to its correct working temperature.
- Shift via all of the gears. This can assist the fluid circulation via all of the parts of the transmission.
- Find the transmission dipstick. It’s usually situated close to the highest of the transmission, both on the passenger or driver’s facet of the engine.
- Pull out the dipstick and wipe off any fluid utilizing a clear fabric.
- Reinsert the dipstick all the way in which into the transmission.
- Pull out the dipstick once more and test the fluid stage.
- The fluid stage needs to be between the "min" and "max" marks on the dipstick. If the fluid is beneath the "min" mark, it must be added.
- If the fluid is beneath the "min" mark, add fluid utilizing a funnel and a clear container. Use solely the kind of fluid beneficial by the producer. Confer with the proprietor’s guide for the particular kind and quantity of fluid required.
**Further Notes:**
| Fluid Stage Indicator | Motion |
|---|---|
| Fluid is beneath the “min” mark | Add fluid |
| Fluid is between the “min” and “max” marks | No motion wanted |
| Fluid is above the “max” mark | Drain extra fluid |
Keep away from overfilling the transmission, as this will trigger points with the shifting and lubrication of the transmission parts.
Finalize the Upkeep
10. **Double-Examine Fluid Stage and Reinstall Drain Plug**
With the engine nonetheless operating, test the transmission fluid stage utilizing the dipstick. The fluid stage needs to be between the “HOT” and “COLD” marks on the dipstick. If the fluid stage is low, add extra fluid via the dipstick tube till it reaches the right stage.
As soon as the fluid stage is right, reinstall the drain plug and tighten it to the required torque.
Reconnect the damaging battery terminal.
Begin the engine and let it run for a couple of minutes to flow into the brand new fluid.
Examine for leaks across the drain plug and filter. If there are not any leaks, your transmission fluid change is full.
Reset the transmission adaptive studying system by disconnecting the battery for at the very least half-hour. This can enable the transmission to relearn the shift patterns and optimize its efficiency.
| Step | Description |
|---|---|
| 1 | Double-check the transmission fluid stage utilizing the dipstick |
| 2 | Add extra fluid if essential |
| 3 | Reinstall the drain plug and tighten it to the required torque |
| 4 | Reconnect the damaging battery terminal |
| 5 | Begin the engine and let it run for a couple of minutes |
| 6 | Examine for leaks across the drain plug and filter |
| 7 | Reset the transmission adaptive studying system by disconnecting the battery for at the very least half-hour |
Easy methods to Change Transmission Fluid in a 2009-2008 Ford Edge
Common transmission fluid adjustments are essential for sustaining the well being and longevity of your Ford Edge’s transmission. This information will offer you step-by-step directions on tips on how to carry out a transmission fluid change in your 2009-2008 Ford Edge.
Supplies and Instruments Required:
- New Transmission Fluid (Mercon LV or equal)
- Drain Pan
- Funnel
- 3/8-inch Socket Wrench
- 1/2-inch Socket Wrench
- Torque Wrench
- Rags
Step-by-Step Directions:
- Security First: Park your Ford Edge on a stage floor and interact the parking brake. Enable the engine to chill fully.
- Find the Drain Plug: Crawl below the car and find the transmission oil pan. The drain plug is usually situated on the backside of the pan.
- Drain the Previous Fluid: Place the drain pan below the drain plug and loosen it utilizing the three/8-inch socket wrench. Enable the previous fluid to empty fully into the pan.
- Change the Drain Plug: As soon as the previous fluid is drained, clear the drain plug and apply a brand new washer. Tighten the drain plug utilizing the torque wrench to the producer’s specs.
- Find the Fill Plug: The fill plug is usually situated on the facet of the transmission housing.
- Fill the Transmission: Utilizing the funnel, pour the brand new transmission fluid into the fill plug till it begins to overflow.
- Examine the Stage: Begin the engine and run it in park. Use the dipstick to test the fluid stage. Add extra fluid as wanted till the extent is between the "chilly" and "scorching" marks on the dipstick.
- Tighten the Fill Plug: As soon as the fluid stage is right, tighten the fill plug utilizing the torque wrench to the producer’s specs.
Individuals Additionally Ask About Easy methods to Change Transmission Fluid in 2009-2008 Ford Edge
How typically ought to I alter the transmission fluid in my 2009-2008 Ford Edge?
Ford recommends altering the transmission fluid each 30,000 to 60,000 miles, relying on driving situations.
What’s the finest kind of transmission fluid for my 2009-2008 Ford Edge?
The beneficial transmission fluid for a 2009-2008 Ford Edge is Mercon LV.
Can I alter the transmission fluid myself?
Sure, it’s potential to alter the transmission fluid your self with fundamental instruments and data. Nevertheless, if you’re not comfy with this activity, it is strongly recommended to hunt skilled help.
