Sustaining your Canon PIXMA TS3522 printer is crucial to make sure optimum efficiency and forestall pricey repairs. Changing the ink cartridges is a vital a part of this upkeep, and it is a process that may be simply completed with a number of easy steps. Whether or not you are experiencing print high quality points or just have to replenish the ink provide, this complete information will give you the mandatory directions to alter the cartridges rapidly and effectively.
The Canon PIXMA TS3522 printer makes use of two forms of ink cartridges: one for black ink and one for coloration ink. The black cartridge is answerable for printing textual content and grayscale photos, whereas the colour cartridge is used for printing coloration photos and graphics. When both of those cartridges is empty or low on ink, the printer will show an error message on its LCD display screen. To resolve this concern, you may want to interchange the empty or low cartridge with a brand new one.
Earlier than you start the cartridge substitute course of, collect the mandatory supplies. You may want a brand new Canon black ink cartridge (CLI-251BK) and a brand new Canon coloration ink cartridge (CLI-251C). Upon getting the brand new cartridges, you may comply with the step-by-step directions offered within the subsequent part of this information. By fastidiously following these directions, you may be certain that the cartridge substitute course of is accomplished safely and accurately, permitting you to renew printing along with your Canon PIXMA TS3522 printer very quickly.
Changing the Black Cartridge
Changing the black cartridge on a Canon Pixma TS3522 printer is a simple process that may be accomplished in a number of easy steps. Listed below are the detailed directions:
-
Find the Cartridge Compartment
Find the cartridge compartment on the entrance of the printer. It’s often coated by a plastic flap or door. Gently open the flap or door to disclose the cartridge holder.
-
Take away the Outdated Cartridge
As soon as the cartridge holder is accessible, gently squeeze the tabs on each side of the outdated black cartridge and pull it straight as much as take away it from the holder.
-
Unpack the New Cartridge
Unpack the brand new black cartridge from its packaging and take away any protecting seals or tape.
-
Set up the New Cartridge
Align the brand new black cartridge with the corresponding slot within the cartridge holder. Rigorously insert the cartridge into the holder till it clicks into place.
-
Shut the Cartridge Compartment
As soon as the brand new cartridge is put in, shut the cartridge compartment flap or door securely.
After changing the black cartridge, the printer will robotically align the print heads and be able to print. Confer with the printer handbook for any particular directions or troubleshooting suggestions.
Inserting the Coloration Cartridge
1. Open the entrance cowl of the printer and wait till the cartridge holder strikes to the middle of the printer.
>* If the cartridge holder doesn’t transfer robotically, flip the printer on and off to reset it.
2. Press the tab on the empty coloration cartridge and raise it straight as much as take away it from the holder.
>* **Word:** The colour cartridge is the one on the precise.
| Cartridge Coloration | Location |
|——————|————-|
| Black | Left |
| Coloration | Proper |
3. Take away the brand new coloration cartridge from its packaging.
>* **Warning:** Don’t contact {the electrical} contacts or ink nozzles on the cartridge.
4. Insert the brand new coloration cartridge into the holder, ensuring it’s dealing with the right means.
>* A: Flip the colour cartridge towards the printer and raise the tab on prime of the cartridge.
>* B: Slide the entrance of the cartridge down all the way in which into the holder till it clicks into place.
>* C: Push down on the highest of the cartridge till it snaps into place.
5. Shut the entrance cowl of the printer.
>* The printer will robotically align the cartridge if needed.
Eradicating the Outdated Cartridges
1. Energy on the printer and open the entrance cowl
Press the ability button to activate the printer if it isn’t already powered on. As soon as the printer is on, press the button positioned on the entrance of the printer, often labeled ‘Open’ or ‘Cowl.’ This motion will open the entrance cowl and expose the cartridge holder.
2. Find the discharge lever and squeeze
As soon as the entrance cowl is open, find the discharge lever located on the precise facet of the cartridge holder. It is usually a small lever that must be squeezed to launch the cartridges.
3. Take away the outdated cartridges
As soon as the discharge lever is squeezed, the cartridge holder will pop up. Rigorously raise the cartridge holder out of the printer and place it on a steady, flat floor. Gently push down on the outdated cartridges to launch them from their slots. Seize every cartridge by its sides and pull it straight as much as take away it. Be cautious to not contact the ink nozzles or electrical contacts throughout this course of.
| Cartridge Sort | Coloration |
|---|---|
| PG-245 | Black |
| CL-246 | Coloration (cyan, magenta, yellow) |
Getting ready the New Cartridges
Earlier than putting in the brand new cartridges, it is necessary to verify they’re appropriate along with your Canon Pixma TS3522 printer. Examine the printer’s person handbook or the cartridge packaging to make sure compatibility.
Take away the brand new cartridges from their packaging. Deal with them fastidiously to keep away from injury.
Shake every cartridge gently for a number of seconds to distribute the ink evenly all through the cartridge.
Take away the protecting caps from the underside of every cartridge. These caps are designed to forestall the ink from drying out throughout storage.
Gently insert every cartridge into the corresponding color-coded slot contained in the printer. Make sure that the cartridge is totally seated and clicks into place.
Shut the ink cartridge cowl and look ahead to the printer to initialize and acknowledge the brand new cartridges. This course of might take a couple of minutes.
As soon as the printer has acknowledged the brand new cartridges, it’s going to carry out an alignment process to make sure correct printing. Comply with the on-screen directions to finish the alignment course of.
After the alignment course of is full, your printer is able to print with the brand new cartridges.
| Cartridge Coloration | Cartridge Quantity |
|---|---|
| Black | PG-245 |
| Coloration | CL-246 |
Opening the Cartridge Cowl
To achieve the ink cartridges, you should first open the cartridge cowl. Here is a step-by-step information:
- Activate the printer. Make sure that the printer is plugged in and the ability button is ON.
- Elevate the scanner unit. Gently raise the scanner unit (the highest a part of the printer that comprises the scanning glass) till it reaches its most top and stays open.
- Find the cartridge cowl. Contained in the opened scanner unit, you will note the cartridge cowl. It’s a black plastic door with a picture of an ink cartridge on it.
- Press the cartridge cowl launch button. On the left facet of the cartridge cowl, there’s a small button. Press this button to launch the cartridge cowl.
- Open the cartridge cowl. When you press the discharge button, the cartridge cowl will spring open, permitting you to entry the ink cartridges.
Finding the Cartridge Slot
To alter the ink cartridge, you may first have to find the cartridge slot. Here is easy methods to do it:
1. Open the Entrance Cowl
To open the entrance cowl, gently press down on the small lever on the backside of the printer. The duvet will open and reveal the ink cartridge slot.
2. Find the Cartridge Slot
As soon as the entrance cowl is open, you may see an oblong slot within the middle of the printer. That is the place the ink cartridges are inserted and eliminated.
3. Establish the Cartridge Holder
Contained in the cartridge slot, you may see a small plastic holder for every ink cartridge. Every holder has a coloured label that corresponds to the colour of the cartridge it holds.
4. Examine for Empty Cartridges
In the event you’re unsure which cartridge is empty, you may test the printer’s ink ranges. On the printer’s management panel, press the “Dwelling” button, then choose “Setup” and “Upkeep.” Choose “Ink Ranges” to view the remaining ink ranges for every cartridge.
5. Decide the Substitute Cartridge
As soon as you’ve got recognized the empty cartridge, you may want to find out which substitute cartridge you want. Confer with your printer’s handbook or the desk beneath to search out the right cartridge on your printer mannequin.
| Printer Mannequin | Black Cartridge | Coloration Cartridge |
|---|---|---|
| Canon Pixma TS3522 | CL-281BK | CL-281 Tri-Coloration |
6. Find the New Cartridge
Retrieve the brand new ink cartridge from its packaging. Watch out to not contact {the electrical} contacts on the underside of the cartridge. Deal with the cartridge by its sides or prime.
Aligning the Cartridge
Step 7: Cleansing the Nozzle
If the print high quality continues to be unsatisfactory after the alignment course of, you could want to wash the nozzle. Here is easy methods to do it:
- Entry the printer’s upkeep menu. On the printer management panel, navigate to the “Setup” possibility and choose “Upkeep”.
- Choose the “Cleansing” possibility. The printer will begin the cleansing course of, which can take a couple of minutes to finish.
- Carry out a nozzle test by printing a take a look at web page. If the print high quality has improved, the cleansing was profitable.
- If the print high quality continues to be poor, repeat the cleansing course of a couple of times extra.
- If the nozzle cleansing doesn’t resolve the print high quality concern, contact Canon assist for help.
Tip: To keep up optimum print high quality, it is beneficial to carry out nozzle cleansing frequently, particularly if the printer has not been used ceaselessly.
Extra Data:
| Drawback | Resolution |
|---|---|
| Vertical traces or bands in prints | Carry out nozzle cleansing. |
| Horizontal traces or bands in prints | Carry out nozzle cleansing and align the cartridges. |
| Blurry or faint prints | Carry out nozzle cleansing and change low ink cartridges. |
Inserting the Cartridge
-
Elevate the duvet
Find the duvet on the entrance of the printer. It has a small deal with on its higher edge. Elevate the duvet to open it.
-
Take away the outdated cartridge (if any)
If there may be an outdated cartridge put in, press on the tab in the back of the cartridge holder to launch it. Then, pull the cartridge straight out of the printer.
-
Unpack the brand new cartridge
Take away the brand new cartridge from its packaging. Watch out to not contact the copper contacts or the ink nozzles.
-
Take away the protecting tape
Find the protecting tape on the underside of the cartridge. Peel off the tape to reveal the ink nozzles.
-
Insert the brand new cartridge
Align the cartridge with the color-coded slot within the printer. Insert the cartridge into the slot till it clicks into place.
-
Press down on the cartridge
As soon as the cartridge is inserted, press down on it till it snaps into place.
-
Shut the duvet
Shut the printer cowl by urgent down on it till it clicks shut.
-
Print an alignment web page
As soon as the cartridge is inserted, the printer will robotically print an alignment web page. This web page helps be certain that the cartridges are correctly aligned. Comply with the directions on the alignment web page to finish the alignment course of.
Closing the Cartridge Cowl
To shut the cartridge cowl, please comply with these simple steps:
- After putting each cartridges into their slots, gently shut the cartridge cowl.
- Press on each side of the duvet to snap it into place.
- Verify that the cartridge cowl is totally closed.
- The ability mild will activate, and the printer will robotically begin charging the ink.
- As soon as the ink charging course of is full, the ability mild will flip inexperienced.
- Your Canon Pixma TS3522 is now able to print!
| Steps | Actions |
|---|---|
| 1 | Find the cartridge cowl. |
| 2 | Open the cartridge cowl. |
| 3 | Take away the outdated cartridges. |
| 4 | Unpack the brand new cartridges. |
| 5 | Insert the brand new cartridges into their slots. |
| 6 | Shut the cartridge cowl. |
| 7 | Press on each side of the duvet to snap it into place. |
| 8 | Verify that the cartridge cowl is totally closed. |
| 9 |
|
Printing a Check Web page
To make sure that the newly put in cartridges are functioning correctly, it is extremely beneficial to print a take a look at web page. This course of permits you to consider the print high quality and determine any potential points with the cartridges or the printer itself. Here is a step-by-step information to printing a take a look at web page in your Canon Pixma TS3522:
-
Activate the printer: Press the ability button on the entrance of the printer to show it on.
-
Load paper: Ensure that there’s sufficient paper within the cassette and that it is the right dimension and sort on your print job.
-
Entry the printer settings: Find the "Settings" or "Preferences" possibility in your pc and open it.
-
Choose "Printing": Inside the printer settings, navigate to the "Printing" or "Printer" part.
-
Select "Upkeep": Search for a tab or possibility labeled "Upkeep" or "Printer Upkeep."
-
Choose "Print Check Web page": Below the "Upkeep" part, you may discover the choice to "Print Check Web page" or "Check Printing."
-
Begin the take a look at print: Click on on the "Print Check Web page" button and the printer will robotically print a take a look at web page.
-
Study the take a look at web page: As soon as the take a look at web page is printed, fastidiously study it for any printing points. Examine for lacking or light colours, streaks, or smudges.
-
Consider the print high quality: If the take a look at web page exhibits any abnormalities or inconsistencies, it signifies that there could also be an issue with the cartridges or the printer.
-
Repeat the method if wanted: If the take a look at web page is unsatisfactory, repeat the cartridge substitute and take a look at printing course of to make sure that the brand new cartridges are put in accurately and functioning as supposed. Seek the advice of the person handbook or contact Canon assist if the problem persists.
How To Change Cartridge On Canon Pixma Ts3522
Changing the ink cartridges in your Canon Pixma TS3522 printer is a straightforward course of that may be accomplished in just some minutes. Listed below are the steps on easy methods to do it:
- Open the entrance cowl of the printer.
- Find the ink cartridges contained in the printer. There will probably be two cartridges, one black and one coloration.
- Press down on the tab on the entrance of the ink cartridge that you just need to change.
- Elevate the ink cartridge out of the printer.
- Unpack the brand new ink cartridge and take away the protecting tape from the underside of the cartridge.
- Insert the brand new ink cartridge into the printer. Guarantee that the cartridge is aligned correctly with the guides within the printer.
- Press down on the ink cartridge till it clicks into place.
- Shut the entrance cowl of the printer.
Your printer is now able to print with the brand new ink cartridges.
Individuals Additionally Ask About How To Change Cartridge On Canon Pixma TS3522
How usually ought to I change the ink cartridges in my Canon Pixma TS3522 printer?
The frequency with which you might want to change the ink cartridges in your Canon Pixma TS3522 printer will rely upon how usually you employ the printer and the kind of printing you do. Nonetheless, as a basic rule of thumb, it is best to change the ink cartridges when the printer signifies that they’re low on ink.
What kind of ink cartridges do I want for my Canon Pixma TS3522 printer?
The Canon Pixma TS3522 printer makes use of two forms of ink cartridges: a black ink cartridge (PG-245) and a coloration ink cartridge (CL-246).
The place can I purchase ink cartridges for my Canon Pixma TS3522 printer?
You should purchase ink cartridges on your Canon Pixma TS3522 printer from quite a lot of retailers, together with Canon’s web site, Amazon, and Staples.
